Medium Mount
Regular price
$269.00
Stuck in the snow? The mud? Racing in Baja? Even worse yet, a firefight?
Every second counts.
Efficiency and focus are paramount…
Quickly access and use your gear without unnecessary movements or confusion.
Our mounts are designed for durability and quick deployment, ensuring you can rely on them and stay focused on what's important.
The mid-sized Mount in our universal quick release line up. Designed for mid-sized gear, medium hard cases, bags, etc.
- Aircraft grade aluminum
- Titanium pin
- Lockable
- 316 Stainless hardware
- Standard: Type III Hard Anodized
- Black: Powdercoated
- Patented self aligning design
- Patented removable and rebuildable pin and block
- 100% Designed and manufactured in Phoenix, AZ USA
Medium Mount Dimensions: 10x10"
*Note: Anodizing may fade over time.
Current lead time 2-3 weeks.
Stuck in the snow? The mud? Racing in Baja? Even worse yet, a firefight?
Every second counts.
Efficiency and focus are paramount…
Quickly access and use your gear without unnecessary movements or confusion.
Our mounts are designed for durability and quick deployment, ensuring you can rely on them and stay focused on what's important.
The mid-sized Mount in our universal quick release line up. Designed for mid-sized gear, medium hard cases, bags, etc.
- Aircraft grade aluminum
- Titanium pin
- Lockable
- 316 Stainless hardware
- Standard: Type III Hard Anodized
- Black: Powdercoated
- Patented self aligning design
- Patented removable and rebuildable pin and block
- 100% Designed and manufactured in Phoenix, AZ USA
Medium Mount Dimensions: 10x10"
*Note: Anodizing may fade over time.
Current lead time 2-3 weeks.
COLOR
STANDARD
You may also like...
Regular price
$269.00
Stuck in the snow? The mud? Racing in Baja? Even worse yet, a firefight?
Every second counts.
Efficiency and focus are paramount…
Quickly access and use your gear without unnecessary movements or confusion.
Our mounts are designed for durability and quick deployment, ensuring you can rely on them and stay focused on what's important.
The mid-sized Mount in our universal quick release line up. Designed for mid-sized gear, medium hard cases, bags, etc.
- Aircraft grade aluminum
- Titanium pin
- Lockable
- 316 Stainless hardware
- Standard: Type III Hard Anodized
- Black: Powdercoated
- Patented self aligning design
- Patented removable and rebuildable pin and block
- 100% Designed and manufactured in Phoenix, AZ USA
Medium Mount Dimensions: 10x10"
*Note: Anodizing may fade over time.
Current lead time 2-3 weeks.
Stuck in the snow? The mud? Racing in Baja? Even worse yet, a firefight?
Every second counts.
Efficiency and focus are paramount…
Quickly access and use your gear without unnecessary movements or confusion.
Our mounts are designed for durability and quick deployment, ensuring you can rely on them and stay focused on what's important.
The mid-sized Mount in our universal quick release line up. Designed for mid-sized gear, medium hard cases, bags, etc.
- Aircraft grade aluminum
- Titanium pin
- Lockable
- 316 Stainless hardware
- Standard: Type III Hard Anodized
- Black: Powdercoated
- Patented self aligning design
- Patented removable and rebuildable pin and block
- 100% Designed and manufactured in Phoenix, AZ USA
Medium Mount Dimensions: 10x10"
*Note: Anodizing may fade over time.
Current lead time 2-3 weeks.
COLOR
STANDARD
Frequently asked questions
Roof racks, Bedracks, Molle Panels, Trucks, SUVs, Trophy Trucks, Boats, Snowmobiles, Airplanes, Helicopters, Tanks…. Anything you can use your imagination on.
Roof racks, Bedracks, Molle Panels, Trucks, SUVs, Trophy Trucks, Boats, Snowmobiles, Airplanes, Helicopters, Tanks…. Anything you can use your imagination on.
Terminology we will use-
Handle to Hinge: A measurement taken externally on the bottom side of your case or gear; the measurement is taken from the Handle side (Front) to the Hinge side (Back)
Protrusions: Not all Cases have flat surfaces externally. They have varying ridges, reinforcements, and moldings.
Base Plate: The “Bottom” side of the Mounts. It has the Pin Block, rear lip, and will be bolted to your vehicle, boat, race car, airplane, tank, rocket, etc…
Mount Side Plate: This is the “Top” side Plate. This is the part that has the Detent Pin Guide, Pin Hole, and Internal Plate/Gasket. It attaches to the case, bag, cooler, Starlink Antenna, or whatever else you can dream of…
Pin Block: The removable, adjustable, and mechanical part of our Mounting System.
Internal Plate/Gasket: This internal plate that goes inside of your case, bag, etc… It provides a strong internal aluminum base, gives the gasket a firm surface to seal against, as well as an area to potentially build off of for any creative or custom applications.
You will need to finalize your choice of gear storage, we recommend doing this first. Once that is completed, it's time to measure… For example purposes, we will use a case.
-Flip your Case upside down.
-Measure externally on the bottom from Handle to Hinge.
-Be aware of any Protrusions
-Determine the physical dimension of the bottom side. Example: Case measurement is 13 ¾” then it will fit a Large Mount 14”
Pro Tips: Different cases have solid plastic protrusions; these can be trimmed or sanded down, providing a tighter and slimmer fitting Mount Plate to the Case.
A general rule we have noticed, most external measurements provided on case dimensions, the Mount will end up being 1 ¼” smaller than the dimension.
For example, Pelican Air 1555 Exterior (L×W×D) 24.76 x 15.46 x 8.24 in (62.9 x 39.3 x 20.9 cm) The handle to hinge measurement is 15.46”, however the physical dimension of the bottom is 13.9” and fits perfectly on our Large Mount 14”
Detailed dimensions are provided in each of the Mounts Photo sections. As always, take your time, double-check, and never hesitate to shoot us a quick message to get clarity.
Terminology we will use-
Handle to Hinge: A measurement taken externally on the bottom side of your case or gear; the measurement is taken from the Handle side (Front) to the Hinge side (Back)
Protrusions: Not all Cases have flat surfaces externally. They have varying ridges, reinforcements, and moldings.
Base Plate: The “Bottom” side of the Mounts. It has the Pin Block, rear lip, and will be bolted to your vehicle, boat, race car, airplane, tank, rocket, etc…
Mount Side Plate: This is the “Top” side Plate. This is the part that has the Detent Pin Guide, Pin Hole, and Internal Plate/Gasket. It attaches to the case, bag, cooler, Starlink Antenna, or whatever else you can dream of…
Pin Block: The removable, adjustable, and mechanical part of our Mounting System.
Internal Plate/Gasket: This internal plate that goes inside of your case, bag, etc… It provides a strong internal aluminum base, gives the gasket a firm surface to seal against, as well as an area to potentially build off of for any creative or custom applications.
You will need to finalize your choice of gear storage, we recommend doing this first. Once that is completed, it's time to measure… For example purposes, we will use a case.
-Flip your Case upside down.
-Measure externally on the bottom from Handle to Hinge.
-Be aware of any Protrusions
-Determine the physical dimension of the bottom side. Example: Case measurement is 13 ¾” then it will fit a Large Mount 14”
Pro Tips: Different cases have solid plastic protrusions; these can be trimmed or sanded down, providing a tighter and slimmer fitting Mount Plate to the Case.
A general rule we have noticed, most external measurements provided on case dimensions, the Mount will end up being 1 ¼” smaller than the dimension.
For example, Pelican Air 1555 Exterior (L×W×D) 24.76 x 15.46 x 8.24 in (62.9 x 39.3 x 20.9 cm) The handle to hinge measurement is 15.46”, however the physical dimension of the bottom is 13.9” and fits perfectly on our Large Mount 14”
Detailed dimensions are provided in each of the Mounts Photo sections. As always, take your time, double-check, and never hesitate to shoot us a quick message to get clarity.
- Measuring Tape
- Drill
- ¼” Drill Bit
- 5/32” Allen
- 7/16” Wrench or Socket/Ratchet
- 3/16” Allen
- ½” Wrench or Socket/Ratchet
- Patience
- Attention to Detail
Pro Tip: Utilize a Stepbit to drill; this provides a smoother hole and deburrs the edge as well.
- Measuring Tape
- Drill
- ¼” Drill Bit
- 5/32” Allen
- 7/16” Wrench or Socket/Ratchet
- 3/16” Allen
- ½” Wrench or Socket/Ratchet
- Patience
- Attention to Detail
Pro Tip: Utilize a Stepbit to drill; this provides a smoother hole and deburrs the edge as well.
EASY ACCESS TO YOUR GEAR
With our patented, secure, self-aligning design, you can be sure that you can access your gear when you need to and keep it secure when you don't.
MEDIUM MOUNT
THIS MOUNT WILL FIT
Pelican Protector 1400
Apache 2800
Customer Reviews
Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
I had strapped down my hard case on my roof rack with some Amazon straps and ties. I knew it was not the best option, but it was one of the only options I had at the time that did not require drilling, bolting and water sealing.
I came across these mounts and was intrigued at the mounting system with the inside plate in tandem with the actual mount on the outside. Because the case is sandwiched between the 2 plates and a rubber seal, it made for a very secure and water tight connection.
Also, the concave design around the screws made for a secure alignment. Because of the location of these indentations, the case seated perfectly every time! The material (being aluminum) kept the mount light and durable. The locking pin also adds a place to put a lock and secure the mount.
Looking at every part of the mount, plate and hardware shows each piece was made with precision and care. Truly an awesome product and well worth the purchase.
I also appreciate the creator of this product has had first hand experience in the durability of the mounts being a Baja Racer and avid offroader.
